Skip to content
Cover & Cargo

By Truck

The Best Tonneau Covers for the Silverado ZR2

The lift, the lockers and the 33-inch tires change nothing about the bed. Two things do: which ZR2 you bought, and the tailgate that is now standard on it.

By Michael W. · Published October 25, 2026

Silver Chevrolet Silverado crew cab pickup parked on a gravel clearing

Cover & Cargo earns a commission from qualifying purchases made through links on this page, at no extra cost to you. It does not change what we recommend or the order we rank things in — here is how we choose and here is the full disclosure.

What this is based on: published manufacturer specifications and warranty terms, cited on each cover; independent published tests where they exist, named and linked; and verifiable owner reports of specific failure modes. We have not fitted these covers to a truck, we do not run a test lab, and we do not claim a test we did not run. Where the evidence for a cover is thin, the page says it is thin.

Quick picks

#CoverBest forScorePrice
1
BAKFlip MX4 product photo from Amazon
BAKFlip MX4The default hard folding cover, and the one most buyers should start from: 400 lb rating, a 5-year warranty, 100 percent bed access, and a seal design the maker revised specifically to stop bulkhead seepage.
Best overall8.4out of 10
2
Roll-N-Lock A-Series product photo from Amazon
Roll-N-Lock A-SeriesThe same mechanism as the M-Series with the vinyl deleted: dual-layer aluminum slats, a powder-coated top, hidden seals and a patented theft-resistant hinge. The most secure manual retractable here that still installs with hand tools.
Best security8.4out of 10
3
LOMAX Stance Hard Tri-Fold product photo from Amazon
LOMAX Stance Hard Tri-FoldThe flattest cover here: extruded aluminum panels sitting a published half-inch above the bed rails, carrying 400 lb. If the silhouette matters to you, this is the one.
Best tri-fold7.8out of 10
4
TruXedo Lo Pro product photo from Amazon
TruXedo Lo ProThe TruXport with the profile taken out of it: a published three-quarters of an inch above the rails, a leather-grained finish, and a limited lifetime warranty against defects.
Best soft roll-up7.6out of 10
5
RetraxPRO MX product photo from Amazon
RetraxPRO MXThe manual version of the same idea and, for most people, the better buy: 500 lb rating, a limited lifetime warranty, double-wall aluminum slats, and no motor to fail.
Best retractable8.4out of 10

Scores are our own editorial judgment on the rubric published at our editorial policy page, weighing security, weather sealing, bed access, install effort, durability, value. They are read off published specifications, warranty terms and sourced owner reports. They are not measurements we took, and they are not user ratings.

The short answer

There is no such thing as a ZR2 tonneau cover. Covers are tooled per bed length and generation, and no listing in the category is written against the ZR2 badge. What you order against is the box: the Silverado 1500 ZR2 is sold as a Crew Cab with the Short Bed only, published at 69.92 in of cargo box length at the floor.

There are two ZR2s, and that is the real trap. The Silverado 1500 ZR2 and the Silverado HD ZR2 are different trucks with different beds - the HD's standard box is the 6 ft 10 in one. Ordering the wrong one is the most expensive mistake available here.

The Multi-Flex tailgate is the fitment variable. It is standard on the ZR2, and only some cover listings state compatibility with it. Buy from a listing that says so, not from one that is silent.

First: which ZR2 do you have

This is the whole reason the query is hard to answer. Chevrolet puts the ZR2 badge on both the half-ton Silverado 1500 and the heavy-duty Silverado HD, and the two trucks do not share a bed. The 1500 ZR2 is a Crew Cab Short Bed truck and nothing else; the HD ZR2 is a crew-cab heavy duty whose standard box is the longer one. Everything else about the trim - the Multimatic DSSV dampers, the lockers, the suspension lift, the 33 or 35-inch mud-terrain tires - is suspension and chassis, and none of it touches the cover decision.

Silverado ZR2 generations and bed lengths
GenerationYearsBed lengths soldWorth knowing
Silverado 1500 ZR22022 onward5 ft 10 in Short Bed only (69.92 in at the floor)Crew Cab only. Order against the 2019-onward Silverado 1500 5' 10" fitment
Silverado HD ZR2 (2500HD)2024 onward6 ft 10 in Standard BedA different fitment entirely - 2500/3500 HD covers, not 1500 covers

Bed lengths are the nominal figures manufacturers key their fitment charts to. Measure your own bed from the bulkhead to the inside face of the closed tailgate and give the retailer that number - it is the one that has to be right.

Published Silverado 1500 box dimensions, for the arithmetic: 69.92 in of length at the floor on the Short Bed, 71.4 in of floor width, 50.6 in between the wheelhousings and 22.4 in of box height. The Standard Bed is 79.44 in and the Long Bed 98.18 in - neither of which the 1500 ZR2 is sold with, which is exactly why this page can be short about fitment and long about the rest.

Order against the bed, never against the badge

Every retailer fitment selector in this category asks for year, model and bed length. None of them asks for trim. If a listing claims to be “for the ZR2,” it is marketing copy over a standard bed-length part number. Measure from the bulkhead to the inside face of the closed tailgate, give the retailer that figure, and ignore the badge entirely - our measuring guide is the two-minute version.

The Multi-Flex tailgate, which is the one thing that matters

For 2026 the Multi-Flex tailgate is standard on the Silverado 1500 ZR2, and it is listed as standard ZR2 equipment on the HD as well. On the rest of the 1500 range it arrives from LT and above. That makes it close to a certainty on a ZR2, and it is the single fitment question worth asking before you check out.

The tailgate folds in six positions, including an inner gate that swings down inside the outer one and a load stop that stands up. A cover's rear rail and tailgate seal sit exactly where that hardware moves. Some covers clear it, some need specific provisions, and - this is the useful part - the category does not handle the question consistently. The Roll-N-Lock A-Series listing for the Silverado 5 ft 10 in bed states outright that it works with the MultiPro/Flex tailgate and does not fit the CarbonPro bed. The BAKFlip MX4 listing does not mention GM's tailgate at all; it publishes an extra-long dual-action tailgate seal available on most applications and leaves the rest to the fitment selector.

The practical rule: treat silence as a question, not as a yes. Buy from a listing that names the Multi-Flex or MultiPro tailgate, or confirm with the retailer against your VIN before ordering. This is a five-minute phone call that prevents a return shipment of a sixty-pound box.

And if you have the CarbonPro bed

CarbonPro is GM's composite box, and it is a separate fitment problem from the tailgate. Several covers in this registry are published as not fitting it, and others need CarbonPro-specific mounting hardware because clamps designed for a steel bed may not be compatible. If your ZR2 has the composite bed, say so when you order rather than discovering it with the rails in your hands.

How we ranked them for this truck

The ZR2 is bought to be driven on surfaces that shake things loose, so the weighting shifts away from showroom features.

  • Sealing and drainage first. A cover on a truck that spends time on washboard and in dust has to keep both out. Published perimeter seal design and drain tubes beat any claim about water resistance.
  • Published load rating. Recovery gear, a spare, firewood on the closed cover - this is the figure that tells you whether the cover is a lid or a surface.
  • Stated Multi-Flex compatibility. Standard equipment on the trim means this stops being a nice-to-have and becomes a filter.
  • Access with the cover on. A 5 ft 10 in box on a lifted truck is already a reach. Full bed access folded against the cab is worth more here than on a lower truck.
  • Warranty term. Terms in this group run from three years to limited lifetime, and on a truck used the way a ZR2 gets used, the term is the maker telling you how confident it is.

Every figure below is the maker's or retailer's published specification, read on the dates cited at the foot of this page. We have not fitted a cover to a ZR2, and nothing here is an estimate - our editorial policy sets out the rubric behind the scores.

The five covers worth buying for a ZR2 bed

BAKFlip MX4 - best overall

Multi-layer aluminum panels with polymer-reinforced tops, a textured matte black finish, 400 lb evenly distributed, EPDM perimeter seals with integrated drainage, 100 percent bed access folded flush against the cab, a published 30-minutes-or-less no-drill install and a five-year warranty. BAK also permits driving with it folded once secured, which on a short bed is the feature you will use most.

It is the default for a reason: the seal design, the rating and the term are all strong at once, and nothing here installs faster. The cons that matter on this truck: the listing does not state Multi-Flex tailgate compatibility, so confirm it before ordering; folded against the cab it still occupies the front third of an already short box; and 400 lb is a real number but it is for the closed cover evenly loaded, not for a point load from a jack or a recovery board. The hard folding roundup has the rest of that family.

Roll-N-Lock A-Series - best security, and the clearest listing

Dual-layer aluminum slats under a corrosion, UV and abrasion-resistant matte black powder coat, an ultra-low-profile canister published at 7.25 in, three latching points so the cover locks part-open, a patented theft-resistant hinge, Roll-N-Lock's built-in tailgate locking system, a keyed twist-lock with a cover that keeps rain and snow out of the cylinder, hidden seals in a one-piece top, and a clamp-on install published at about an hour with hand tools. Three-year limited warranty.

On a ZR2 it earns its place twice. It is the strongest manual retractable in this registry for security, and its Silverado 5 ft 10 in listing is the one that actually answers the tailgate question - it states MultiPro/Flex compatibility and states that it does not fit the CarbonPro bed. The cons are honest ones: Roll-N-Lock publishes no evenly-distributed load rating, so the aluminum top is not an invitation to stack anything on it; the canister permanently costs you 7.25 in of a 69.92 in box; and three years is short against the five-year terms on hard folding covers in similar money.

LOMAX Stance - best tri-fold

Extruded aluminum panels under a heavy-duty textured urethane finish, 400 lb evenly distributed, a profile that sits half an inch above the bed rails, and a limited three-year warranty. It is the flattest-looking hard cover in this registry, which on a truck with 33-inch tires and a two-inch lift is a deliberate aesthetic choice rather than an accident.

Buy it for the look and the rating together. Against it: LOMAX publishes no install time, the three-year term is where the class leaders publish five, and a tri-fold gives you two-thirds of the bed rather than the whole thing when folded - which on a 5 ft 10 in box is a more noticeable difference than on a long bed. The Silverado tri-fold page goes deeper on that family.

TruXedo Lo Pro - best soft roll-up

Industrial-grade tear-resistant vinyl over a gloss-black powder-coated aluminum frame, a leather-grained finish, a published three-quarters of an inch above the bed rails, rolls to the bulkhead and buckles for nearly full bed access, tool-free removal, a no-drill clamp-on fit published at under an hour, and a limited lifetime warranty against manufacturing and material defects - the longest coverage in this registry.

It is the sensible answer for anyone who wants the bed usable more than they want it armored. The cons are the type's: vinyl is cuttable, so it is weather protection and privacy rather than security; there is no load rating because there is nothing to load; and a soft cover on a dusty trail will need the seals wiped more often than an aluminum one. The Silverado roll-ups cover the rest.

RetraxPRO MX - best retractable

Double-wall aluminum slats, matte black powder coat, 500 lb evenly distributed, a key-lockable TraxLatch that holds and locks the cover at any point, integrated water management with drain tubes, a published -40F to 180F test range, a stated sub-60-minute no-drill install on four clamps, and a limited lifetime warranty. Assembled in Grand Forks, North Dakota.

If the ZR2 is a truck you leave at trailheads with gear in the bed, this is the cover that makes that comfortable: the highest published rating in the group, the longest term, and an environmental test range that is relevant to how this truck gets used. The cons: the canister permanently occupies bed length at the bulkhead and RETRAX publishes no canister dimension, the lifetime coverage does not transfer when you sell, and it is the most expensive cover on this page by a wide margin. The retractable roundup and our RETRAX review have the full picture.

The published figures side by side

Covers for the Silverado 1500 ZR2 bed - published specifications only
CoverTypeLoad ratingMulti-Flex stated on the listing?Warranty
BAKFlip MX4Hard folding400 lbNot stated - confirm before ordering5 years
Roll-N-Lock A-SeriesRetractable (manual)Not publishedYes - and not for the CarbonPro bed3-year limited
LOMAX StanceTri-fold (hard)400 lbNot stated - confirm before orderingLimited 3-year
TruXedo Lo ProRoll-up (soft)Not publishedNot stated - confirm before orderingLimited lifetime against defects
RetraxPRO MXRetractable (manual)500 lbNot stated - confirm before orderingLimited lifetime, non-transferable

Every cell is the maker's or retailer's published figure, read on the dates cited below. 'Not published' means the maker states no figure; we do not estimate one. The Multi-Flex column records what the listing says, not what we tested.

What the lift, the tires and the lockers change: nothing

Worth saying plainly, because it is the quiet worry behind the query. A factory suspension lift raises the whole truck, including the bed, by the same amount. The bed rails keep their relationship to the box, the clamp points are unchanged, and a cover tooled for the 5 ft 10 in Silverado box fits the lifted one identically. Mud-terrain tires, DSSV dampers and electronic lockers are all below the bed floor and are irrelevant to a cover.

What a lifted truck does change is ergonomics. The bed rail is further off the ground, so reaching across a closed cover to the bulkhead is harder than it was on a stock truck. That is an argument for a cover with full access folded against the cab, or for a retractable that locks part-open, and against a tri-fold that leaves the front third permanently stacked.

The short version

Confirm which ZR2 you have, then order against the bed: 5 ft 10 in for the Silverado 1500 ZR2, the HD's 6 ft 10 in standard box for the Silverado HD ZR2. Buy the BAKFlip MX4 for the best all-round combination of seal design, rating, term and 30-minute install, confirming the Multi-Flex clearance first. Buy the Roll-N-Lock A-Series if security is the priority and you want the one listing that answers the tailgate question without a phone call. Take the LOMAX Stance for the flattest hard cover, the TruXedo Lo Pro if you would rather have the bed than the armor, and the RetraxPRO MX if 500 lb and a lifetime term are worth the canister and the money.

If you came here from the 1500 side of the range, the full Silverado 1500 page covers every bed length, and the Silverado short bed page is the one written specifically for the box the ZR2 comes with. HD owners should start at the Silverado 2500HD page instead.

The picks in detail

#1 · Most truck owners

BAKFlip MX4

BAK Industries · Hard folding

The default hard folding cover, and the one most buyers should start from: 400 lb rating, a 5-year warranty, 100 percent bed access, and a seal design the maker revised specifically to stop bulkhead seepage.

Security8.5
Weather sealing8.5
Bed access8.0
Install effort9.0
Durability8.5
Value8.0
8.4overall, out of 10

What it does well

  • 400 lb evenly distributed rating is at the top of the folding class, and it is published rather than implied
  • The revised EPDM perimeter seal plus drain system targets the bulkhead, which is where folding covers actually leak
  • Folds flat against the cab for full bed access without taking the cover off the truck
  • 5-year warranty is longer than most hard folding covers in the same bracket

Where it gives way

  • Folded open it occupies roughly the front third of the bed — the published 100 percent access means the bed is reachable, not that the space is free
  • Textured black finish shows water spotting on dark trucks more than a gloss panel does
  • No published figure for cover weight, so the one-person-install question is unanswered by the maker

Skip it if: Anyone who needs the bed open and covered at the same time all day. Folded against the cab it eats the front third of the bed, and nothing folding escapes that.

Published specifications for BAKFlip MX4
ConstructionMulti-layer aluminum, polymer-reinforced top panels
FinishTextured matte black
Load rating400 lb, evenly distributed
Warranty5 years
Stated install time30 minutes or less
DrillingNone required on most trucks
Bed access100 percent — folds flush against the cab
SealingEPDM perimeter seals, integrated drainage

Specifications read from RealTruck — BAKFlip MX4 (Gen 3) published specifications.

$1,179.00$1,299.999% offView on Amazon

#ad Price as of November 21, 2026. This listing fits 2021-2026 Ford F-150 (incl. Raptor/Lightning) 5' 7" bed - BAK part 448339. How this is funded

BAKFlip MX4 product photo from Amazon
Amazon product photograph of the BAKFlip MX4 listed for the 2021-2026 Ford F-150 (incl. Raptor/Lightning) 5' 7" bed - BAK part 448339.

#2 · Security on a manual retractable

Roll-N-Lock A-Series

Roll-N-Lock · Retractable (manual)

The same mechanism as the M-Series with the vinyl deleted: dual-layer aluminum slats, a powder-coated top, hidden seals and a patented theft-resistant hinge. The most secure manual retractable here that still installs with hand tools.

Security9.5
Weather sealing8.5
Bed access9.0
Install effort7.5
Durability8.5
Value7.0
8.4overall, out of 10

What it does well

  • Dual-layer aluminum slats with a powder-coated top: no vinyl to chalk, fade or get cut
  • The theft-resistant hinge and the built-in tailgate lock make it the strongest manual retractable in this registry
  • Hidden seals in a one-piece top, so there is no exposed seam running the length of the cover
  • Still a clamp-on, roughly one-hour install despite being the premium model

Where it gives way

  • A clear premium over the M-Series for the same drive mechanism and the same canister
  • No maker-published load rating, so the aluminum top is not an invitation to stack anything on it
  • 3-year warranty, same as the cheaper M-Series - paying more buys material, not paperwork
  • A powder-coated top shows scratches as bare aluminum rather than hiding them the way vinyl does

Skip it if: Buyers who will not pay a premium for a metal top over a vinyl one - the mechanism underneath is the same.

Published specifications for Roll-N-Lock A-Series
ConstructionRobust dual-layer aluminum slat construction
FinishCorrosion, UV and abrasion-resistant matte black powder coat
CanisterUltra-low-profile, 7.25 in deep
LatchingThree latching points for partial bed coverage
SecurityPatented theft-resistant hinge; patented built-in tailgate locking system; keyed twist-lock latch with a key slot cover that keeps rain and snow out of the cylinder
SealingOne-piece design with hidden seals
OperationTorsion spring drive with an integrated pull strap for closing from outside the bed
InstallClamp-on; most applications need no drilling, simple hand tools and about an hour
Load ratingNot published by the maker; one retailer listing states 125 lb, which we could not confirm against a Roll-N-Lock document
Warranty3-year limited

Specifications read from RealTruck - Roll-N-Lock A-Series published specifications, read 2026-10-11.

$1,478.00$1,849.9920% offView on Amazon

#ad Price as of November 21, 2026. This listing fits 2019-2025 Chevy/GMC Silverado/Sierra 5' 10" bed, works with the MultiPro/Flex tailgate, not the CarbonPro bed - Roll-N-Lock part BT223A. How this is funded

Roll-N-Lock A-Series product photo from Amazon
Amazon product photograph of the Roll-N-Lock A-Series listed for the 2019-2025 Chevy/GMC Silverado/Sierra 5' 10" bed, works with the MultiPro/Flex tailgate, not the CarbonPro bed - Roll-N-Lock part BT223A.

#3 · The lowest profile

LOMAX Stance Hard Tri-Fold

LOMAX · Tri-fold (hard)

The flattest cover here: extruded aluminum panels sitting a published half-inch above the bed rails, carrying 400 lb. If the silhouette matters to you, this is the one.

Security8.0
Weather sealing7.5
Bed access7.5
Durability8.0
Value7.5
Install effortnot published
7.8overall, out of 10

What it does well

  • Half an inch above the rails is a published figure, and it is the flattest in this registry
  • Extruded aluminum panels rather than a folded skin — stiffer per millimeter of thickness
  • Textured urethane finish wears better than paint on a surface people lean on

Where it gives way

  • 3-year warranty where the class leaders publish 5
  • LOMAX does not publish an install time or a drilling answer, so you are relying on the retailer listing
  • The low profile leaves very little room for anything proud of the bed rails underneath

Skip it if: Buyers comparing warranties — three years, against five from BAK, Extang and UnderCover.

Published specifications for LOMAX Stance Hard Tri-Fold
ConstructionExtruded aluminum panels
FinishHeavy-duty textured urethane
Load rating400 lb, evenly distributed
WarrantyLimited 3-year
Profile heightSits ½ inch above the bed rails
Stated install timeNot published

Specifications read from RealTruck — LOMAX Stance Hard Tri-Fold published specifications.

$1,159.11View on Amazon

#ad Price as of November 21, 2026. This listing fits LOMAX part G3040019, single-rail configuration. How this is funded

LOMAX Stance Hard Tri-Fold product photo from Amazon
Amazon product photograph of the LOMAX Stance Hard Tri-Fold listed for the LOMAX part G3040019, single-rail configuration.

#4 · A soft cover that sits flush

TruXedo Lo Pro

TruXedo · Roll-up (soft)

The TruXport with the profile taken out of it: a published three-quarters of an inch above the rails, a leather-grained finish, and a limited lifetime warranty against defects.

Security4.0
Weather sealing7.0
Bed access8.5
Install effort8.5
Durability7.0
Value8.5
7.6overall, out of 10

What it does well

  • Limited lifetime defect warranty — the longest coverage in this registry
  • Three-quarters of an inch above the rails is a published figure and it looks it
  • Rails mount inside the bed, so the bed rail caps stay visible

Where it gives way

  • Nearly full access, not full — the rolled bundle and its buckles stay in the bed
  • Soft cover, so the security story is the same as every soft cover: there isn't one
  • An hour to fit rather than the TruXport's 30 minutes

Skip it if: Anyone expecting the whole bed clear. Rolled and buckled it gives nearly full access, not the TruXport's clean 100 percent.

Published specifications for TruXedo Lo Pro
ConstructionIndustrial-grade tear-resistant vinyl, gloss-black powder-coated aluminum frame
FinishLeather-grained vinyl
WarrantyLimited lifetime against manufacturing and material defects
Stated install timeLess than 1 hour
DrillingNone — no-drill clamp-on mounting
Profile height¾ inch above the bed rails
Bed accessRoll to the bulkhead and buckle for nearly full access; tool-free removal

Specifications read from RealTruck — TruXedo Lo Pro published specifications.

$499.99$549.999% offView on Amazon

#ad Price as of November 21, 2026. This listing fits 2015-2026 Ford F-150. How this is funded

TruXedo Lo Pro product photo from Amazon
Amazon product photograph of the TruXedo Lo Pro listed for the 2015-2026 Ford F-150.

#5 · A retractable that will outlast the truck

RetraxPRO MX

RETRAX · Retractable (manual)

The manual version of the same idea and, for most people, the better buy: 500 lb rating, a limited lifetime warranty, double-wall aluminum slats, and no motor to fail.

Security9.0
Weather sealing8.5
Bed access8.5
Install effort7.5
Durability9.0
Value7.0
8.4overall, out of 10

What it does well

  • Limited lifetime warranty on a 500 lb retractable is the strongest published pairing in this registry
  • Locks at any point along the bed, not just closed — genuinely useful with long cargo
  • Operates independently of the tailgate, so the tailgate is not part of the security story

Where it gives way

  • The canister still costs you bed length at the bulkhead, same as any retractable
  • Warranty does not transfer to the next owner
  • Costs more than most folding covers that carry a lower, but adequate, rating

Skip it if: A second owner — RETRAX publishes the lifetime coverage as non-transferable.

Published specifications for RetraxPRO MX
ConstructionDouble-wall aluminum slats
FinishMatte black powder coat
Load rating500 lb, evenly distributed
WarrantyLimited lifetime, non-transferable
LockingKey-lockable TraxLatch handle, infinite locking positions
Stated install timeLess than 60 minutes
DrillingNone — clamp-on rails, four quick-attach clamps
Temperature tested-40°F to 180°F
SealingIntegrated water management with drain tubes
OriginAssembled in Grand Forks, North Dakota

Specifications read from RealTruck — RetraxPRO MX published specifications.

$2,199.99$2,399.998% offView on Amazon

#ad Price as of November 21, 2026. This listing fits 2019-2025 Chevrolet Silverado / GMC Sierra 1500 - RETRAX part 80482. How this is funded

RetraxPRO MX product photo from Amazon
Amazon product photograph of the RetraxPRO MX listed for the 2019-2025 Chevrolet Silverado / GMC Sierra 1500 - RETRAX part 80482.

Common questions

Is there a tonneau cover made specifically for the Silverado ZR2?

No. Tonneau covers are tooled per bed length and generation, and no listing in the category is written against the ZR2 trim. You order against the box: the Silverado 1500 ZR2 uses the 2019-onward Silverado 1500 5 ft 10 in short bed fitment, published at 69.92 in of cargo box length at the floor.

What bed does the Silverado 1500 ZR2 come with?

One only. The 1500 ZR2 is sold as a Crew Cab with the Short Bed - 69.92 in of cargo box length at the floor, 71.4 in of floor width, 50.6 in between the wheelhousings and 22.4 in of box height. There is no standard-bed or long-bed ZR2 to get confused about.

Does a tonneau cover work with the Multi-Flex tailgate on a ZR2?

Often, but check the listing rather than assuming. The Multi-Flex tailgate is standard equipment on the ZR2, and cover makers do not handle it consistently: the Roll-N-Lock A-Series listing for the Silverado 5 ft 10 in bed states MultiPro/Flex compatibility outright, while the BAKFlip MX4 listing does not mention GM's tailgate at all. Buy from a listing that names it, or confirm with the retailer against your VIN.

Does the ZR2's suspension lift affect tonneau cover fitment?

No. A factory lift raises the bed and the cab together, so the bed rails, the clamp points and the box dimensions are unchanged. A cover tooled for the 5 ft 10 in Silverado box fits the lifted truck identically. What it does change is reach: the rail sits higher off the ground, which is an argument for a cover that gives full access rather than a tri-fold that stacks at the bulkhead.

Is the Silverado HD ZR2 the same fitment as the 1500 ZR2?

No, and this is the costliest mistake available here. The Silverado HD ZR2 is a 2500HD whose standard box is the 6 ft 10 in one, so it takes 2500/3500 HD covers. The 1500 ZR2 takes 1500 short-bed covers. The badge is the same; the parts are not.

What about the CarbonPro bed on a ZR2?

Treat it as a separate fitment question. CarbonPro is GM's composite box, several covers are published as not fitting it, and others need CarbonPro-specific mounting hardware because clamps designed for a steel bed may not be compatible. Tell the retailer you have the composite bed before you order.

Sources